Spray Foam Roofing

Spray foam roofing is what you need to set your home free from short-term maintenance. To extend the roof life of your residence, Managemyroof offers spray foam insulation services that protect and extend the life of your roof. This involves the prevention of leaks and damage from severe weather conditions. We provide you that extra layer of defense against the rain, sun, and wind, which you must choose if looking forward to a cost-effective method to maintain your roof and provide it with first-grade security.

What is Spray Foam Roofing?

Spray Polyurethane Foam Roofing is the process of creating a layer of protection on an existing roof by spraying liquid onto it. The liquid then converts and expands into foam, which is water and leakproof. The main purpose of waterproof spray foam is to repair any saturated areas on the roof to fill in the gaps. 

Spray foam roofing is made up of two components: polyol resin and isocyanate. The items expand when combined and adhere to the roof. If you use great stuff spray foam, and install it in the correct manner, it can last up to 50 years. 

Is it Worth Buying the Spray Foam Insulation Kit? If yes, Why?

The Spray Foam kit is worth buying due to several compelling factors. Some of the advantages you get with insulation spray foam are:

• High R-value

Spray Foam Roofing has high R-Value; the capacity at which the insulation material can resist the flow of heat. High R-value equals to a higher insulation power. And, zero chances for the heat or air to pass through it. This ultimately leads to lower energy consumption and cost. 

Have a look at the common R-values in roof materials: 

Spray Polyurethane Foam: 6.6 per inch

Metal: 0.00 per inch

BUR Gravel: 0.34 per inch

BUR Smooth: 0.24 per inch

XPS Insulation: 5.0 per inch

EPS Insulation: 3.85 per inch

Polyiso: 5.5 per inch

If you get done the closed cell spray foam, it offers an R-Value of 7. Managemyroof offers you both; closed cell and open cell spray foam insulation services. 

• Quick installation

Another benefit of getting the spray foam roofing is that it is easier as well as quicker to install than any other standard roofing systems in the market. Why? 

• SPF Roofing is not prone to tear-offs. 
• SPF Roofing enters the penetrations in the roof within 2 minutes or so. 
• Less material and equipment is required as opposed to traditional rewind methods. 

• Seamless and self-flashing

A conventional roofer will take around half an hour to fully flash a curb. However, when it comes to splash foam spray, only 2 to 3 minutes are enough. For comparison, talking about the other roofing systems such as rubber, is quite a task to do. Custom cut installation is the biggest con of rubber roofing. On the contrary, Splash Foam Roofing is faster to get done with into the: 

• Walls 
• Vents 
• Pipes 
• Drains 
• HAVC Units
• Parapt Walls 

And more! 

• Renewable and long-lasting

Spray Foam Roofs do not require or re-coating for at least 20 years, if installed correctly. The first coat is applied at a thickness of 20 to 30 mils, which cuts to 7-10 mils over a span of 10 years per the roof wear. The best way to determine whether it requires maintenance is to check the thickness. It’s better to re-coat before the layer gets too thin to protect you from the UV Rays. 

Managemyroof offers scheduled maintenance, extended warranties, and the service to re-coat everytime the roof requires, allowing the roof to be truly long-lasting and renewable. 

Prevention from Disadvantages As Well

There are some unnoticeable disadvantages of spray foam roofing, but if you opt us for this service, you can be saved from the same. 

• Cost: SPF Roofin is usually expensive on the upfront. Managemyroof provide a detailed cost-benefit analyses to help manage your initial investment. Our expertise ensures that you save on energy bills, maintenance cost, and the initial expenses. 

• Cleanup: The installation process of Spray Foam Roofing is messy, which ultimately leads the foam to enter unintended surfaces. However, our professional installers avoid such doings with precise application techniques. The job to minimize mess and get you a clean installation is ours. 

• Installation Conditions: Spray Foam Roofing requires an optimal weather condition (dry or moderate temperature). Managemyroof gets you the service during the idle time to ensure proper application even in less than ideal conditions. 

• Overspray Risk: There is a risk of overspray, where foam particles drift and settle on nearby surfaces, causing damage. We employ experienced technicians who use controlled spraying techniques & barriers to prevent overspray, protecting surrounding areas.

Spray Foam Roofing Installation Process at Home 

It is possible to DIY Spray Foam Insulation, but with careful preparation, technique, and safety guidelines. DIY Kits are available from the spray foam industries, which you can use for small projects or areas. However, for larger sections, it is recommended to go with the professionals who ensures everything said:  

Step-by-step guide on how spray foam is applied. 

Before starting the Roof installation procedure, the existing roof is thoroughly cleaned and prepared. Our contractors prepare the roof rather than stripping it offer by getting rid of all the small dirt like particules, dust, and potential contaminants. The process is done via sweeping the roof, air pressure, or vacuuming, depening upon the wear of the roof. After that: 

1. The contractor will spray a layer of polyurethane foam created with two components polyol and resin. 
2. The put down material will then expand 20 times its actual size, creating a solid and seamless surface. The expanded layer thickens up to 1.5 inches. 
3. It is then coated with acrylic or elastomeric silicone with submerged granules. The layer, then thickens between 20-20 mils ( one mil = thousand of an inch). 

The coating protects your roof from UV lights, severe weather conditions, wear and tear, etc. You get a seamless, moisture-resistant, as well as a durable roof covering once the work is done. 

Tips and Recommendations for Maintenance and Longevity

To make sure that your Spray Foam Roofing is protected for an extended period of time, follow the preceding steps: 

• Clean the roof regularly with pressurized water and check for any debris like leaves, branches, dust, etc. This will prevent the creation of algae and drainage issues. 
• If there is any grease, oil stains, or other such stains, use a non-acidic cleaner. 
• Ensure that the drains are clear of any obstructions, allowing the water flow smoothly. 
• Don’t wait for the layer to vanish. Inspect and find any issues to prevent a costly damage. 
• Compltely avoid DIY Repairs as it does more harm than good to the Spray Foam Roofing.
• Depending upon our recommendation, recoat the roof every 10-12 years to maintain its longevity. 

How Can We Help? Services, Addressing Common Issues & Solutions

Managemyroof doesn’t leave you hanging even after providing you the services. We are more than assistive when it comes to addressing the common issues of spray foam roofing and providing you with the needful solutions. Apart from the SPF Roofing, we offer: 

• Huge white paper on spray foam in vented attic
• Movie prop building spray foam
• Spray foam on a vaulted ceiling in garage
• Pond spray foam services

Common Issues with Spray Foam Roofing

The common issues we can address are: 

1. Moisture Infiltration: Improper installation or damage can lead to moisture getting trapped, causing mold, rot, and structural issues.
2. Thermal Expansion and Contraction: Spray foam can expand and contract with temperature changes, leading to cracks and potential leaks.
3. UV Damage: Prolonged exposure to UV rays can degrade the foam, causing it to become brittle and crack.
4. Physical Damage: Heavy foot traffic, falling objects, or poor installation can result in punctures, blisters, and delamination

Solutions Provided by Managemyroof

The solutions to the addressed issues: 

1. Regular Inspections and Maintenance: Managemyroof offers routine inspections to identify and address issues early, preventing costly repairs down the line.
2. Professional Installation and Repairs: Ensuring proper installation and using experienced professionals like us for repairs can mitigate many common issues.
3. Protective Coatings: Applying UV-resistant coatings can protect the foam from sun damage, extending the roof’s lifespan.
4. Moisture Management: Managemyroof can install moisture barriers and ensure proper sealing to prevent water infiltration. 

So, if you are looking for “spray foam insulation near me,” it;s high time that you connect with out professionals and get SPF Roofing done for a safe and secure roof that protects you for all the years to come.

FAQs